Monitor shows history, strength, size and time of Signal.
It analyzes passed and actual signal.
You can compare signal on monitor.
This feature helps interpret the find you are searching for.
Depth and size can be observed on the monitor by observing and
analyzing it's signal.
With proper interpretation of signal on the monitor you can detect the
size, depth and location.
The width of signal shows the size of object. The steep jump shows
the depth of object in the ground.
This detector has very fine audible sound - just by careful listening
you can learn about the object in the ground.
Signal is very sensitive.
All electronics can be fined tuned by the operator in the field.
Average depth of this metal detector is very good:
Beer can size object - 150 cm ( 60 inches - 5 feet!)
25 cm ( about 10 inches) size
object in ground can be easily detected from 200 cm ( 2 meters!) (79
inches - 6.5 feet - 9.8 feet!)
Metal Gasoline Tank - 260 cm - 300 cm (2.6 - 3 meters!) (103 -
118 inches - 8.5 - 9.8 feet !!!)
As many manufacturers do not show videos from actual field test - this
detector can be shown on the video below showing the real detection
test in an underground cellar in Europe.
This video shows the clear sound and monitor of detector in the field.
Above results are with use of antenna frame in the size of 115 x 115 cm
( 45 x 45 inches - 3.75 x 3.75 feet)
This metal detector has been tested many times in the field and it has
well design, durable construction, it is very easy to tune in the field.
Frame Detector PI is very stable at work - the reliability has been
tested by the professionals.
The oscillation of signal generator is regulated from 100 Hz to 1 Khz
Reset Button - resets all signals to beginning. Reset is very helpful
feature used in the field.
Field tests shows better depth that most brands on the market for this
time of metal detector. Lorenz 5 showed much lower depth detection
compare with Frame Pulse PI.
Lorenz Deep Max 3 has slightly bigger level of detection or the same
level of depth - depends on soil or location or object of search.
Compare with other detectors in Pulse Induction level - this detector
has 3 - 4 times lower price and better reliability then most others.
Learning the operation - the key to success!
Operational Information - this detector is one of the best on the
market today - you just need to learn the proper operation.
Object is at deep level.
Small object right below the surface
Small object is very
Large object at medium level.
AUDIO - Main turn
On and Off. It regulates sound. Headphones are recommended. Do not turn
to maximum - it can have negative vibration on work of the unit.
POWER - regulates power going out of
generator. Width of impulse is from
50 uS do 250 uS, the wider
the impulse - the more electricity it takes. Optimal working position
knob is at "1 o'clock"
Max is about 550 mA.. Halve the power gives good , deep and sable
signal. You can get power higher and at the highest position it should
not run more then 10 minutes - it get hot due to maximum generation of
regulates sensitivity of receiver. The better sensitivity, the better
range, however it lowers stability of work. Most optimal position
knob is at "1 o'clock). You can easily distinguish deep object by
listening and watching the monitor.
THRESHOLD - regulates
the level of leading signal
and level of visual graph on the screen, ( with RESET pressed in and
far away from any
metal objects at such level that you can hear and see the drift of
RESET - memory,
after pressing RESET detector returns to set THRESHOLD level. After the
work in field the levels do not return to set before, without any metal
in the field, the reset button gets back to the level before.
DELAY - this
enable to adjust different antennas to detector.
FREQ. - is for
smooth regulation of frequency from emitting generator from 100 Hz to
Optimal set - 1000 HZ and
needs to be changed due to soil condition. Upper Screen shows delay -
potentiometer on the back
of detector should be set between 20 - 35 uMs (microseconds) for
antenna of 1 x 1 meters.
Every situation, soil, location, weather
condition does have effect on this detector so you need to learn how to
fine tune in every condition before work is done that guarantees
Tuning up should be made far away from any metals.
1 m x 1 m - standard -
others: 2m x 2m, 2m x 1m, 3m x 1m
1 Year Warranty
Today Special Sale Only - Price: $1595.00
CYBER METAL CASH