THIS WEEK SPECIAL ALL ORDERS ABOVE $250.00 WILL RECEIVE THE ENERGIZED WATER SPHERE. It will positively charged all water.  Purify and Energize your water !

The Anywhere Anywhere Water Filter

The Berkey® Base is made of a durable non BPA copolyester and is designed to fit under most gravity filtration systems including the Big Berkey®, the Travel Berkey® and Berkey Light ® systems.

The Berkey® Base elevates gravity purification systems enabling containers to fit under the spigots. This allows a gravity purifiers to be used directly on the ground or situated anywhere on a flat surface and eliminates the requirement that the purifier be placed on the edge of a table or counter. The base has an optional eight lamp LED lighting system (Not recommended for Travel Berkey® systems). This allows optimum use during no or low light conditions. Used with transparent Berkey Light™ systems, the light shines through the water causing the droplets of filtered water to light up and glow. The resulting waves reflect soothing patterns of light onto the surrounding area. The lighting effects coupled with the melody of raindrops, combine to create a unique and relaxing atmosphere.

The eight LED lamps within the base are the perfect night light and the WHITE LED's are bright enough to provide a long lasting low energy source of reading light, emergency light, a camping light as well as a beacon for water in no or low light conditions. The COBALT BLUE LED's are beautiful and are a real eye catcher. Additionally, the LED lamps are directional so the base can also be used as a stand-alone emergency flashlight.
 

See below for sample blue LED reading:	See below for sample white LED reading:
:
Close-up of White LED Base	Close-up of Plain Base

LED lights are unique in that they require very small amounts of energy and yet are very bright, in fact, the LED's can be spotted for over one mile in dark environments. This enables the LED to be illuminated all night long on a single charge of the internal rechargeable batteries. The Berkey® Base comes complete with an AC adapter allowing the base to be powered by a standard AC current. When the LED's are switched off, the AC adapter automatically begins recharging the batteries. When utilizing the optional Berkey Battery Adapter ™ case, the low energy LED's will provide light (8 hours per night) for approximately two weeks on a single set of four AA alkaline batteries. Incredibly, you get two weeks of emergency light for the price of one set of small AA batteries. When standard electrical power is unavailable, the optional Berkey MP Solar ™ charger can be used to recharge the Berkey® Base batteries during daylight hours for later use at night. The Berkey MP Solar ™ charger also has its own internal batteries which can also be used to power the Berkey® Base or other applications.

The LED lamps can be powered by the internal rechargeable batteries (included with LED base), the AC adapter (included with LED base), the Berkey Battery Adapter ™ case (optional) and the Berkey MP Solar ™ charger (optional).

The flexibility of the Berkey® Base allows for its use as a long term source of lighting in environments where electrical power is unavailable. Where electricity is available, the AC adapter allows for continuous use. The bright LED lamps have an average life of 100,000 hours, which is more than 11 years of continuous use.

The Berkey® Base is currently available in three versions; without lights, with bright white lights and with beautiful cobalt blue lights. The base without lights is designed for situations where elevation of the gravity filter is desired without the need for any auxiliary lighting. Cobalt blue is designed with beauty in mind and is for use in situations where it is desirable to enhance the ambiance of the surrounding atmosphere. It is simply beautiful. The white LED version is designed for practical use in situations where emergency or auxiliary lighting may be required. The lights are bright enough to be useful as a reading light, night light, flash-light or room light.

Berkey® water filters have become the standard of excellence by which all other water filtration systems are measured. You deserve the freshest, cleanest water possible from the world's most superior water filtration systems.

	The Berkey MP Solar ™ charger is designed for use in conjunction with the Berkey Light™ LED Base ™. The Berkey® LED lamps are unique because incredibly, they have an average life of more than 11 years of continuous use and are so bright they can be spotted for over a mile in the dark yet, they require very small amounts of energy. The LED technology is more expensive than traditional light bulbs but it is worth every penny because the low energy LED's can save hundreds of dollars in replacement batteries alone. The Berkey MP Solar ™ charger can be used during the day to recharge the Berkey Base ™ batteries for later use at night. It also has its own internal batteries, which can be used to power The Berkey Light™ LED Base ™.
	The Berkey MP Solar ™ charger can also be used to power a countless number of other applications, including mobile phones, disc (cassette) players, digital cameras, PDA's, radios, shavers, etc. Its multi-voltage capabilities (6V, 7.2V and 12V), multiple adapters and six powerful Nickel Metal Hydride rechargeable batteries provide for a flexible and convenient source of auxiliary backup power at night or whenever sunlight is not available.
	The Berkey MP Solar ™ charger is easy to use. Simply place the Berkey MP Solar ™ charger in a sunny location, select the proper voltage, plug in your application and the Berkey MP Solar ™  charger begins charging. The built-in indicator light confirms the application is charging.
	Disconnect your application and the system automatically begins charging its own powerful Nickel Metal Hydride rechargeable batteries and & there's no guesswork because the "battery full" indicator light turns on when the batteries are fully charged. Simply plug your application into the outlet jack and your instant backup power source is ready for use. Notes: 1) Batteries degrade when they become overheated. When charging the Berkey Light™ LED Base ™ or any other application that has rechargeable batteries, if possible, it is strongly recommended that the application (such as the Berkey Light™ LED Base ™) be placed in a shady area to prevent the rechargeable batteries from overheating. 2) To prevent the rechargeable batteries within the Berkey MP Solar ™ charger from overheating, it is recommended that they be charged no longer than 4-6 hours at a time.
	The Berkey MP Solar ™ charger CONTENTS: Solar Charger: 1 piece Connecting wire: 1 piece Multi-purpose adapter: 1 piece Mobile phone adapter (Motorola V series): 1 piece User's manual: 1 piece
	FEATURES: * Environmental friendly. * Free electricity from the sunlight * Book size, can be easily placed in brief case, hand bag, even in pocket * Outlet jacks of different voltage: The Berkey MP Solar ™  charger can charge a wide range of applications, such as mobile phones, disc (cassette) players, digital cameras, PDA’s, radios, shavers etc. * Built-in battery cabin allows for the charging of 6 AAA NMH (Nickel Metal Hydride) re-chargeable batteries. This provides a convenient source of auxiliary backup power for application when sunlight is not available. INSTRUCTIONS: Unfold the solar charger and place it in a sunny location facing directly at the sun. When the plug is inserted into the outlet jack, charging process then begins, charging process can be seen from the charging indicator. When connecting wire is disconnected, the solar charger stops charging the application and begins charging the rechargeable batteries. No ON/OFF switch is needed. BATTERY CABIN: 1. Install rechargeable batteries: use a screwdriver to release the cover, and insert the 6 AAA rechargeable batteries into the built-in battery cabin and replace the cover. 2. When disconnected from applications, the solar charger can automatically charges its own internal rechargeable batteries. Simply leave the solar charger under direct sunlight until the "battery full" indicator turns on. 3. 7.2V outlet jack is designed to take power from the rechargeable batteries. Simply plug your application into this jack, you will then have an instant backup power source. POWER APPLICATIONS: 1. Choose the suitable voltage according to your application. The solar output voltage can be interchanged between 6V and 12V by shifting the voltage switch. 6V output is to power those applications wherein the voltage required is equal to or below 6V. The 12V output is to power those applications wherein the voltage required is between 6V and 12V. 2. Plug connecting wire into the Berkey MP Solar ™ charger. 3. Plug the multi-purpose adapter into the connecting wire. 4. Plug the multi-purpose adapter into the Berkey Light™ Base or other application. CHARGING MOBILE PHONES: 1. Choose the suitable voltage required by you mobile phone. 2. Plug connecting wire into the Berkey MP Solar™ charger. 3. Plug the multi-purpose mobile phone adapter into the connecting wire. 4. Connect phone adapter to your mobile phone CAUTION: The Berkey MP Solar ™ charger is designed to charge one application at a time. The Berkey MP Solar ™ charger is not waterproof. Do not utilize in wet or rainy conditions.
	Adapter for charging cell phones, PDA's or other small electronic devices that have an adapter for plugging into a cigarette lighter.